Linear AM-RRR, ACP00500 Remote Radio Receiver Control Access System, RG-59 Cable

Description

Linear AM-RRR, ACP00500 Remote Radio Receiver Control Access System, RG-59 Cable
Linear AM-RRR, ACP00500 Remote Radio Receiver Control Access System, RG-59 Cable
The Model AM-RRR Remote Radio Receiver is designed for use with Linear’s access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception.
Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver’s connector. The directional (EXA-2000) and omnidirectional (EXA-1000) remote antennas wire to the receiver’s antenna connector with type RG-59 cable.
An onboard RADIO RANGE knob allows adjustment of the receiver’s gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receiver’s performance and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the incoming signals.
The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements.
Features
Provides extended range for radio-based access control system
Up to 500 foot radius radio coverage
Weather-resistant housing for outside or indoor mounting
Optional directional remote or omnidirectional remote antennas
Integral radio gain control for adjustment of radio range
Power supplied by access controller
Compatible with all MegaCode transmitters
Compatible with AM3Plus, AE1000Plus, and AE2000Plus ONLY
RF frequency: 318 MHz
4.25” W x 6.25” H x 2.5” D without antenna
AM-RRR
Indicator:
Red/green LED turns red for DC power from controller, turns green when access is granted to a transmitter; radio LED lights when the receiver detects a radio signal
Gain Adjustment:
Radio range knob for setting maximum radio range
Antennas:
9-1/2″ whip antenna with F-connector (supplied); optional remote directional EXA-2000 or remote omnidirectional EXA-1000 antenna, wiring with type RG-59 cable to receiver’s connector
Wiring:
up to 300 feet with 24 AWG, 500 feet with 20 AWG
Frequency:
318 MHz
Power:
Supplied by access controller
Dimensions:
4.25” W x 6.25” H x 2.5” D (without antenna)
Accessories for use with the AM-RRR
Model
Description
MDKP
Exterior Wireless Keypad
EXA-1000
Omni-directional Remote Antenna
EXA-2000
Directional Remote Antenna
Models compatible with the AM-RRR
Model
Description
AE1000Plus
Commercial Telephone Entry System with Access Control – Four Doors
AE2000Plus
Commercial Telephone Entry System with Access Control – Four Doors, Large Screen
AM3Plus
4-Portal Access Controller
MDT-1B
1-Channel Block Coded Visor Transmitter
MDT-2B
3-Channel Block Coded Visor Transmitter
MDT-4B
5-Channel Block Coded Visor Transmitter
MT-1B
1-Channel Block Coded Visor Transmitter
MT-2B
2-Channel Block Coded Visor Transmitter
ACT-31C
1-Channel Custom Block Coded Key Ring Transmitter
ACT-34C
4-Channel Custom Block Coded Key Ring Transmitter
ACT-31D
1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag
ACT-34D
4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag
MGT
Gate Safety Edge Transmitter
Payments & Returns Policy